Low Range Off-Road Suzuki Samurai 4.5-Inch Deluxe Weld-On Spring Over Axle Kit With Drivelines
Low Range Off-Road Suzuki Samurai 4.5-Inch Deluxe Weld-On Spring Over Axle Kit With Drivelines
These kits will enable you to mount your leaf springs over the front and rear axles of your Suzuki Samurai for about 4.5-inches of lift. If your springs are in good shape, you should be able to accommodate at least 31-inch tires. If you trim your fenders, you can go as high as 33-inch tires.
We have witnessed axle housing damage caused by spring pads with very thin contact points. Compared to others on the market, our pads spread the load over a much larger surface area for maximum durability. This kit includes 1” extended front & rear OE-style drivelines instead of driveline spacers.
Kit Includes:
- Complete Contact HD Self-Aligning Spring Over Axle Pads
- Front Shock Tower Kit and Rear Upper Shock Mount
- Front and Rear Lower Shock Mounts
- 1” Extended Front & Rear Drivelines
- 21" Coated Stainless Steel Braided Brake Lines
- U-Bolt and Plate Kit
IMPORTANT NOTES:
- You will need to raise your steering linkages since your relocated springs will interfere with the stock drag link. Our Suzuki Samurai Align Correct Steering Kits are ideal for this application.
- You will need extended shocks to use with your SPOA kit. We carry a wide selection of ProComp ES9000 shock and can assist you in selecting the correct length for your build.
- This kit WILL NOT FIT 2WD Samurai models without extra parts. Please contact our off-road sales specialists for further details.
WARNING - Cancer and Reproductive Harm - www.P65Warnings.ca.gov
- Complete Contact HD Self-Aligning Spring Over Axle Pads
- Front Shock Tower Kit and Rear Upper Shock Mount
- Front and Rear Lower Shock Mounts
- 1” Extended Front & Rear Drivelines
- 21" Steel Braided Brake Lines
- U-Bolt and Plate Kit
LROR-309721SUZUKI SAMURAI - 4 Brake Lines(1986-1988.5) 1986 Suzuki Samurai 1987 Suzuki Samurai 1988.5 Suzuki Samurai |
LROR-309722SUZUKI SAMURAI - 3 Brake Lines(1988.5-1995) 1988.5 Suzuki Samurai 1989 Suzuki Samurai 1990 Suzuki Samurai 1991 Suzuki Samurai 1992 Suzuki Samurai 1993 Suzuki Samurai 1994 Suzuki Samurai 1995 Suzuki Samurai |
Lower Shock Mount Instructions Front Shock Tower Instructions Spring-Over Pad Instructions Rear Upper Shock Mount Instructions
All products carry our 12 Month Limited Warranty. All warranties are limited to the original purchaser and are not transferable to subsequent owners of the product. The warranty period begins on the purchase date. Trail-Gear warrants that it will repair or replace, free of charge, any eligible product which, under normal conditions of use and service, proves to be defective in materials or workmanship. This warranty does not cover any labor costs incurred in diagnosis of defects, removal or reinstallation of a product, nor does it cover any other consequential expenses.
Please read and review our return and warranty requirement document before sending in products.
Warranty Exclusions
Trail-Gear Inc. warranty does not cover, and Trail-Gear Inc. shall not be liable for, any undertaking, representation, or agreements made by dealers or other third parties selling Trail-Gear products, except where such agreements are within the provisions of this Warranty.
Specifically excluded from this warranty are failures caused by lack of maintenance, misuse, negligence, modification, abuse, improper application, crash damage, installation or operation, or failures caused by unauthorized service or use of unauthorized parts.
Additionally excluded from this warranty are parts that are subject to normal wear and tear, such as bushings, fluids, hoses, gaskets, belts, etc. Products not manufactured by Trail-Gear Inc. are excluded from any warranty and shall be handled with the original manufacturer.
All parts used in a competitive racing environment are excluded from this warranty. If, after inspection, a part returned, under any warranty, is deemed to be ineligible for warranty repair or replacement, the part may be repaired or replaced for a discounted cost. Return shipping charges will apply. Any part for which a warranty replacement is sought must be returned to Trail-Gear Inc. before any replacement items can be shipped. All replacement parts shipped before the suspect part has been received and evaluated by Trail-Gear, MUST BE PAID IN FULL. In such a case, after the suspect part has been received and approved for a warranty replacement, the purchase price for the replacement will be refunded.
- Please contact Trail-Gear Inc. at 559-252-4950 or email sales@trail-gear.com prior to returning any product under warranty to verify that warranty is still in effect.
- Products must be shipped back to Trail-Gear Inc. at the expense of the customer. Ship all products to:
- ATTN: WARRANTY
- 5356 E. Pine Avenue
- Fresno, CA 93727.
- Please place a clearly marked copy of the original invoice inside the package.
- Please include a short note stating the problem you are experiencing.
If any of the above mentioned policy is not met, the package will be refused or warranty claim denied. By completing the steps above, this will ensure faster processing of your claim so that Trail-Gear can get your product back to you as quickly as possible. All warranties are generally processed within 2-3 business days of Trail-Gear receiving the parts from you. Additional delays may be incurred if product needs additional testing or repairing.
If you are an international customer, please email the warranty department at sales@trail-gear.com to receive further instruction. International customers may have the option to field destroy an approved warranty to avoid costly return shipping. In this case, any shipping charges for replacement parts will be at the expense of the customer.