COVID-19, supply shortages, & a surge in demand are causing longer-than-normal ship times. Rest assured that your order is our top priority. READ MORE…
PLEASE NOTE: Commercial carriers such as UPS, FedEx, and other carriers have suspended Delivery Service Guarantees until further notice. As a result, we are currently unable to refund shipping costs in the event your order delivery is delayed.

Trail-Gear Front Leaf Spring Kits for 79-95 Toyota Pickup, 85-95 4Runner & 95-04 Tacoma

Toyota Front Leaf Spring Kit

Super Flex Front Leaf Springs

Our front springs feature a full military wrap on the front and the 1/4 wrap on the rear. Spring rate is 220 lbs per inch. Leaf pack is 6 leaves. Springs are 47" long as measured along the top leaf. Pin to center of front mount is 22" and pin to center of the shackle mount is 25". New poly bushings and left side spring pad are included with springs.

Note: These springs are not a direct OEM replacement, installation requires the relocation of some mounting brackets.

Available in the following sizes:

  • 3" Springs, Front, 110015-1-KIT
  • 4" Springs, Front, 110011-1-KIT
  • 5" Springs, Front, 110013-1-KIT

WARNING: Cancer and Reproductive Harm -


  • Full Military Wrap on the Front and 1/4" Wrap on the Rear
  • Includes New Poly Bushings and Left Side Spring Pad
  • Heavy Duty Springs Recommended for V6 and V8 Applications
  • Sold in Pairs
Please Note! These springs are not a direct OEM replacement! Installation requires the relocation of some mounting brackets!



  • 3" Front Leaf Springs
  • Free Length (From Spring Eye Centers): 1080 mm (~42-1/2")
  • Military Wrap Eye to Center Pin: 578 mm (~22-3/4")
  • Free Height: 190 mm (~7-1/2")
  • Spring Rate: 260 lb/in


  • 4" Front Leaf Springs
  • Free Length (From Spring Eye Centers): 1105 mm (~43-1/2")
  • Military Wrap Eye to Center Pin: 591 mm (~23-1/4")
  • Free Height: 208 mm (~8-3/16")
  • Spring Rate: 245 lb/in


  • 5" Front Leaf Springs
  • Free Length (From Spring Eye Centers): 1118 mm (~44")
  • Military Wrap Eye to Center Pin: 527 mm (~20-3/4")
  • Free Height: 227 mm (~8-15/16")
  • Spring Rate: 223 lb/in


  • 3" Heavy Duty Front Leaf Springs
  • Free Length (From Spring Eye Centers): 1080 mm (~42-1/2")
  • Military Wrap Eye to Center Pin: 575 mm (~22-5/8")
  • Free Height: 190 mm (~7-1/2")
  • Spring Rate: 320 lb/in


  • 4" Heavy Duty Front Leaf Springs
  • Free Length (From Spring Eye Centers): 1099 mm (~43-1/4")
  • Military Wrap Eye to Center Pin: 578 mm (~22-3/4")
  • Free Height: 216 mm (~8-1/2")
  • Spring Rate: 300 lb/in


  • 5" Heavy Duty Front Leaf Springs
  • Free Length (From Spring Eye Centers): 1111 mm (~43-3/4")
  • Military Wrap Eye to Center Pin: 527 mm (~20-3/4")
  • Free Height: 222 mm (~8-3/4")
  • Spring Rate: 280 lb/in


1979 Toyota Pickup
1980 Toyota Pickup
1981 Toyota Pickup
1982 Toyota Pickup
1983 Toyota Pickup
1984 Toyota Pickup
1985 Toyota Pickup
1986 Toyota Pickup
1987 Toyota Pickup
1988 Toyota Pickup
1989 Toyota Pickup
1990 Toyota Pickup
1991 Toyota Pickup
1992 Toyota Pickup
1993 Toyota Pickup
1994 Toyota Pickup
1995 Toyota Pickup


1985 Toyota 4Runner
1986 Toyota 4Runner
1987 Toyota 4Runner
1988 Toyota 4Runner
1989 Toyota 4Runner
1990 Toyota 4Runner
1991 Toyota 4Runner
1992 Toyota 4Runner
1993 Toyota 4Runner
1994 Toyota 4Runner
1995 Toyota 4Runner


1995 Toyota Tacoma
1996 Toyota Tacoma
1997 Toyota Tacoma
1998 Toyota Tacoma
1999 Toyota Tacoma
2000 Toyota Tacoma
2001 Toyota Tacoma
2002 Toyota Tacoma
2003 Toyota Tacoma
2004 Toyota Tacoma

1. Install bushings into the springs using polyurethane-safe grease. If applicable, install the sleeves into the bushings.

2. Mount the springs to the vehicle. The end with the military wrap should be at the front.

3. Check to make sure the long side of the bolts on the spring clamps are pointed towards the inside of the vehicle.

4. Fully cycle the suspension and verify that no part of the springs interfere with other suspension components (e.g. shocks). Also verify that the brake lines are long enough and do not stretch at maximum droop or get pinched by other components. In some instances, leaf spring clamps may need to be removed or relocated to avoid interference with other components.

5. If you have any questions or concerns, please e-mail your questions to
or call us at 559.549.6737.

All products carry our 12 Month Limited Warranty. All warranties are limited to the original purchaser and are not transferable to subsequent owners of the product. The warranty period begins on the purchase date. Trail-Gear warrants that it will repair or replace, free of charge, any eligible product which, under normal conditions of use and service, proves to be defective in materials or workmanship. This warranty does not cover any labor costs incurred in diagnosis of defects, removal or reinstallation of a product, nor does it cover any other consequential expenses.

Please read and review our return and warranty requirement document before sending in products.

Warranty Exclusions

Trail-Gear Inc. warranty does not cover, and Trail-Gear Inc. shall not be liable for, any undertaking, representation, or agreements made by dealers or other third parties selling Trail-Gear products, except where such agreements are within the provisions of this Warranty.

Specifically excluded from this warranty are failures caused by lack of maintenance, misuse, negligence, modification, abuse, improper application, crash damage, installation or operation, or failures caused by unauthorized service or use of unauthorized parts.

Additionally excluded from this warranty are parts which are subject to normal wear and tear, such as bushings, fluids, hoses, gaskets, belts, etc. Products not manufactured by Trail-Gear Inc. are excluded from any warranty and shall be handled with the original manufacturer.

All parts used in a competitive racing environment are excluded from this warranty. If, after inspection, a part returned, under any warranty, is deemed to be ineligible for warranty repair or replacement, the part may be repaired or replaced for a discounted cost. Return shipping charges will apply. Any part for which a warranty replacement is sought must be returned to Trail-Gear Inc. before any replacement items can be shipped. All replacement parts shipped before the suspect part has been received and evaluated by Trail-Gear, MUST BE PAID IN FULL. In such a case, after the suspect part has been received and approved for a warranty replacement, the purchase price for the replacement will be refunded.

    To begin your warranty claim:
  • Please contact Trail-Gear Inc. at 559-252-4950 or email prior to returning any product under warranty to verify that warranty is still in effect.
  • Products must be shipped back to Trail-Gear Inc. at the expense of the customer.
    Ship all products to:
    5356 E. Pine Avenue
    Fresno, Ca 93727.
  • Please place a clearly marked copy of the original invoice on the outside of the package.
  • Please include a short note stating the problem you are experiencing.

If any of the above mentioned policy is not met, the package will be refused or warranty claim denied. By completing the steps above, this will ensure faster processing of your claim so that Trail-Gear can get your product back to you as quickly as possible. All warranties are generally processed within 2-3 business days of Trail-Gear receiving the parts from you. Additional delays may be incurred if product needs additional testing or repairing.

If you are an international customer, please email the warranty department at to receive further instruction. International customers may have the option to field destroy an approved warranty to avoid costly return shipping. In this case, any shipping charges for replacement parts will be at the expense of the customer.