2005-CURRENT Toyota Tacoma 3-Inch Front Lift Kits
2005-2019 Toyota Tacoma 3-Inch Front Lift Kits
These kits from Low Range Off-Road deliver 3-inches of lift in the front using strut lift spacers that fit on top of your strut assembly. There is no need to dismantle the strut assembly and your ride quality isn't compromised by pre-loading your springs.
The 2WD version contains strut spacers and hardware only.
The 4WD version includes differential spacers to protect the CV joints from a damaging operating angle, skid plate spacers to compensate for the repositioned differential and bump stop spacers to prevent overcompression.
The strut lift spacers are made of CNC machined 6061-T6 aluminum with high tensile yield strength. They arrive pre-installed with Grade 10.9 metric studs. All included nuts and bolts are flanged with either a 12 or 14mm heads to stay consistent with the rest of your Toyota fasteners (you're welcome).
- While the kit easily allows you to upgrade to tires as large as 33-Inches with the stock wheels, larger tires are possible with modifications (e.g. removing mud flaps, trimming skid plates, etc). Please note that tire fitment is largely dependent on wheel choice.
- These kits do not fit the TRD Pro or TRD Baja Tacoma variants.
- Does not fit 5-lug 2WD. Will fit 2WD PreRunner.
Full Color Instructions Available On Instructions Tab!
WARNING Cancer and Reproductive Harm - www.P65Warnings.ca.gov
Strut Spacers made of 6061-T6 Aluminum
- 2005 Toyota Tacoma
- 2006 Toyota Tacoma
- 2007 Toyota Tacoma
- 2008 Toyota Tacoma
- 2009 Toyota Tacoma
- 2010 Toyota Tacoma
- 2011 Toyota Tacoma
- 2012 Toyota Tacoma
- 2013 Toyota Tacoma
- 2014 Toyota Tacoma
- 2015 Toyota Tacoma
- 2016 Toyota Tacoma
- 2017 Toyota Tacoma
- 2018 Toyota Tacoma
- 2019 Toyota Tacoma
Download installation instructions for your LRT Tacoma Lift Kit here.Installation Instructions
All products carry our 12 Month Limited Warranty. All warranties are limited to the original purchaser and are not transferable to subsequent owners of the product. The warranty period begins on the purchase date. Trail-Gear warrants that it will repair or replace, free of charge, any eligible product which, under normal conditions of use and service, proves to be defective in materials or workmanship. This warranty does not cover any labor costs incurred in diagnosis of defects, removal or reinstallation of a product, nor does it cover any other consequential expenses.
Please read and review our return and warranty requirement document before sending in products.
Trail-Gear Inc. warranty does not cover, and Trail-Gear Inc. shall not be liable for, any undertaking, representation, or agreements made by dealers or other third parties selling Trail-Gear products, except where such agreements are within the provisions of this Warranty.
Specifically excluded from this warranty are failures caused by lack of maintenance, misuse, negligence, modification, abuse, improper application, crash damage, installation or operation, or failures caused by unauthorized service or use of unauthorized parts.
Additionally excluded from this warranty are parts which are subject to normal wear and tear, such as bushings, fluids, hoses, gaskets, belts, etc. Products not manufactured by Trail-Gear Inc. are excluded from any warranty and shall be handled with the original manufacturer.
All parts used in a competitive racing environment are excluded from this warranty. If, after inspection, a part returned, under any warranty, is deemed to be ineligible for warranty repair or replacement, the part may be repaired or replaced for a discounted cost. Return shipping charges will apply. Any part for which a warranty replacement is sought must be returned to Trail-Gear Inc. before any replacement items can be shipped. All replacement parts shipped before the suspect part has been received and evaluated by Trail-Gear, MUST BE PAID IN FULL. In such a case, after the suspect part has been received and approved for a warranty replacement, the purchase price for the replacement will be refunded.
- Please contact Trail-Gear Inc. at 559-252-4950 or email email@example.com prior to returning any product under warranty to verify that warranty is still in effect.
- Products must be shipped back to Trail-Gear Inc. at the expense of the customer.
- ATTN: WARRANTY
- 5356 E. Pine Avenue
- Fresno, CA 93727.
Ship all products to:
- Please place a clearly marked copy of the original invoice inside the package.
- Please include a short note stating the problem you are experiencing.
If any of the above mentioned policy is not met, the package will be refused or warranty claim denied. By completing the steps above, this will ensure faster processing of your claim so that Trail-Gear can get your product back to you as quickly as possible. All warranties are generally processed within 2-3 business days of Trail-Gear receiving the parts from you. Additional delays may be incurred if product needs additional testing or repairing.
If you are an international customer, please email the warranty department at firstname.lastname@example.org to receive further instruction. International customers may have the option to field destroy an approved warranty to avoid costly return shipping. In this case, any shipping charges for replacement parts will be at the expense of the customer.