2" All-Pro Long Travel Kit with King Remote Reservoir Coilovers 2016+ Tacoma

Rating:
% of 100
$4,081.35
Limited Stock!
SKU
All-Pro Long Travel Kit with King Remote Coilovers 16+ Tacoma
No Sales Tax in USA for Registered Customers
Item Ships Free (Contiguous 48 U.S. States Only)

2016+ Toyota Tacoma Long Travel Kit with King Coilovers

Following the success of our original Tacoma Long Travel Kit All-Pro Off-Road is proud to reveal our High Clearance Long Travel Suspension kit for the 3rd Generation Tacoma!

Engineered to get 12” of wheel travel while extending the track width by 2” per side, this new Long Travel Kit has been completely redesigned to give you an additional 2 inches of ground clearance. Our long travel kit features 4130 Chromoly tubular upper and lower control arms. The Lower Control Arms (LCAs) are boxed for maximum strength and plated for extreme durability. An integrated skid plate gives All-Pro Control Arms unbeatable skid protection on the trail. Our LCAs also feature a 1” uniball that replaces the weak factory lower ball joint.

The 2” wider Upper Control Arms (UCAs) feature an industry leading 1.25” uniball for maximum articulation and vertical travel. The uniball is adapted to fit to the factory spindle using heat-treated 17-4 Stainless Steel misalignment spacers. All four control arms, upper and lower, pivot on polyurethane bushings and have built in zerk fittings for easy maintenance.

From rocks to sand and everything in between, this long travel kit goes anywhere without sacrificing comfort, quality, and performance. Our lift kits are born and developed on some of the hardest trails around, including the Hammers, Rubicon, and Moab, the All-Pro LT kit is built tough!

Paired with a set of King Remote Reservoir Coil-Overs

These are King’s 2.5" remote reservoir front coilovers for the 2-3.5" lengthened axle long travel systems from All-Pro. They are available with optional compression adjuster knob. King Coilovers are such a great match to our Long Travel Kit that we feel it only makes sense to package them together and save you time. 

Additional Parts Recommended for Installation:

Chromoly Axle Shafts (not included)

Our extended heat-treated 4340 chromoly axle shafts, made by Currie Enterprises, are required for 4×4 applications. They are inserted into the factory inner and outer CVs to retain 4WD. These are not included in the kit and must be purchased separately. Please contact our sales staff if you have questions before ordering.

Timbren Bumpstops (not included)

All-Pro has teamed up with Timbren SES to offer an upgraded bumpstop for use with our LT kit, or even stock. They are made of a softer compound than their usual options which are specifically designed for increased weight carrying capacity. Timbren Bumpstops provide a smoother stop than the factory bumpstop without needlessly limiting travel. Recommended for 33”+ tires. These are not included in the kit and must be purchased separately.

Long Travel Shocks (not included)

Long Travel Shocks are required for our Long Travel Kit.  For best results, we recommend Fox 2.5 Factory Series Remote Reservoir Long Travel Coilover Shocks or the Fox 2.5 Factory Series Remote Reservoir Long Travel Coilover Shocks with DSC Adjustment.

Tire and Wheel Recommendations:

Max tire size without fiberglass fenders: 315/75/16 or 315/70/R17 (35″)
With Fiberglass (37″)
Max wheel backspacing: 4.75”
Alignment specs: Toe = factory; Camber = factory; Caster = 2.5-3 degrees

⚠ WARNING Cancer and Reproductive Harm - www.P65Warnings.ca.gov

  • WOR-307165: 2" All-Pro Long Travel Kit for 2016+ Tacoma w/ King Remote Reservoir Front Coilovers
  • WOR-307166: 2" All-Pro Long Travel Kit for 2016+ Tacoma w/ King Remote Reservoir Adj. Front Coilovers

  • 2010 Toyota 4Runner
  • 2011 Toyota 4Runner
  • 2012 Toyota 4Runner
  • 2013 Toyota 4Runner
  • 2014 Toyota 4Runner
  • 2015 Toyota 4Runner
  • 2016 Toyota 4Runner
  • 2017 Toyota 4Runner
  • 2018 Toyota 4Runner
  • 2019 Toyota 4Runner
  • 2020 Toyota 4Runner
  • 2010 Toyota FJ Cruiser
  • 2011 Toyota FJ Cruiser
  • 2012 Toyota 4Runner
  • 2013 Toyota 4Runner
  • 2014 Toyota 4Runner

All-Pro Warranty_image

ALL-PRO products are warranted to be free from defects in materials and workmanship prior to installation. Any alteration, improper use, or modification will void this warranty. This warranty is extended by All-Pro to the original purchaser.  This warranty is effective for 90 days from the date of purchase. Any description of the goods is for the sole purpose of identifying them, is not a part of the bargain, and does not constitute a warranty that the goods will conform to that description.  Any sample, model or advertised item is for illustrative purposes only, is not part of the basis for the bargain, and is not to be construed as a warranty that the good will conform to the sample, model, or advertised item. No affirmation of fact or promise made by All-Pro will constitute a warranty that the goods will conform to the affirmation or promise.

Purchasers and users of our products are responsible for determining the applicability of a product to their specific application. In the event of a defect, malfunction, or failure to conform to this warranty, All-Pro will repair or replace the goods without charge within 30 days of receipt of goods.  If All-Pro is unable to replace and/or repair the goods or if All-Pro, at its sole discretion, determines that neither option is commercially practicable or cannot be made within 30 days of receipt of the goods, All-Pro will refund the purchase price. The purchaser is responsible for installation and removal of all parts, freight or shipping costs, and incidental or consequential damages.

 

Write Your Own Review
Only registered users can write reviews. Please Sign in or create an account
COPYRIGHT © 2023 WHEELER'S OFF-ROAD. ALL RIGHTS RESERVED.