Suzuki Samurai 4.5-Inch Basic Weld-On Spring Over Axle Kit

Rating:
0% of 100
$520.19
63 In Stock
SKU
Suzuki Samurai Basic Weld-On Spring Over Axle Kit

A Lift Kit for Budget Restricted DIY Enthusiasts

These kits will enable you to mount your leaf springs over the front and rear axles of your Suzuki Samurai for about 4.5-inches of lift. If your springs are in good shape, you should be able to accommodate at least 31-inch tires. If you trim your fenders, you can go as high as 33-inch tires (like the Samurai pictured).

We have witnessed axle housing damage caused by spring pads with very thin contact points.  Compared to others on the market, our pads spread the load over a much larger surface area for maximum durability.

Kit Includes:

  • Front and Rear Spring Over Axle Pads
  • 3/4" Drive Shaft Spacer for Front Axle
  • 1" Drive Shaft Spacer for Rear Axle
  • Coated Stainless Steel Braided Brake Lines
  • U-Bolt and Plate Kit

PLEASE NOTE:

  • In addition to this kit you will need 4 new Suzuki Samurai Lower Shock Mounts (SSP-SMLK).  Your old shock mounts are on the U-bolt plate that is discarded in the upgrade.
  • You will need to raise your steering linkages since your relocated springs will interfere with the stock drag link.  Our Suzuki Samurai Align Correct Steering Kit is ideal for this application.
  • This kit WILL NOT FIT 2WD Samurai models without extra parts. Please contact our off-road sales specialists for further details.

⚠ WARNING Cancer and Reproductive Harm - www.P65Warnings.ca.gov

  • Complete Contact HD Self-Aligning Spring Over Axle Pads
  • Two Aluminum Drive Shaft Spacers
  • Steel Braided Brake Lines
  • U-Bolt and Plate Kit

  • SSP-SPOA1: 1986-1988.5 (4 Brake Lines)
  • SSP-SPOA2: 1988.5-1995 (3 Brake Lines)

  • SUZUKI SAMURAI
    (1986-1995)


    1986 Suzuki Samurai
    1987 Suzuki Samurai
    1988 Suzuki Samurai
    1989 Suzuki Samurai
    1990 Suzuki Samurai
    1991 Suzuki Samurai
    1992 Suzuki Samurai
    1993 Suzuki Samurai
    1994 Suzuki Samurai
    1995 Suzuki Samurai

All products carry our 12 Month Limited Warranty. All warranties are limited to the original purchaser and are not transferable to subsequent owners of the product. The warranty period begins on the purchase date. Trail-Gear warrants that it will repair or replace, free of charge, any eligible product which, under normal conditions of use and service, proves to be defective in materials or workmanship. This warranty does not cover any labor costs incurred in diagnosis of defects, removal or reinstallation of a product, nor does it cover any other consequential expenses.

Please read and review our return and warranty requirement document before sending in products.

Warranty Exclusions


Trail-Gear Inc. warranty does not cover, and Trail-Gear Inc. shall not be liable for, any undertaking, representation, or agreements made by dealers or other third parties selling Trail-Gear products, except where such agreements are within the provisions of this Warranty.

Specifically excluded from this warranty are failures caused by lack of maintenance, misuse, negligence, modification, abuse, improper application, crash damage, installation or operation, or failures caused by unauthorized service or use of unauthorized parts.

Additionally excluded from this warranty are parts which are subject to normal wear and tear, such as bushings, fluids, hoses, gaskets, belts, etc. Products not manufactured by Trail-Gear Inc. are excluded from any warranty and shall be handled with the original manufacturer.

All parts used in a competitive racing environment are excluded from this warranty. If, after inspection, a part returned, under any warranty, is deemed to be ineligible for warranty repair or replacement, the part may be repaired or replaced for a discounted cost. Return shipping charges will apply. Any part for which a warranty replacement is sought must be returned to Trail-Gear Inc. before any replacement items can be shipped. All replacement parts shipped before the suspect part has been received and evaluated by Trail-Gear, MUST BE PAID IN FULL. In such a case, after the suspect part has been received and approved for a warranty replacement, the purchase price for the replacement will be refunded.

    To begin your warranty claim:
  • Please contact Trail-Gear Inc. at 559-252-4950 or email sales@trail-gear.com prior to returning any product under warranty to verify that warranty is still in effect.
  • Products must be shipped back to Trail-Gear Inc. at the expense of the customer.
    Ship all products to:
    ATTN: WARRANTY
    5356 E. Pine Avenue
    Fresno, CA 93727.
  • Please place a clearly marked copy of the original invoice inside the package.
  • Please include a short note stating the problem you are experiencing.

If any of the above mentioned policy is not met, the package will be refused or warranty claim denied. By completing the steps above, this will ensure faster processing of your claim so that Trail-Gear can get your product back to you as quickly as possible. All warranties are generally processed within 2-3 business days of Trail-Gear receiving the parts from you. Additional delays may be incurred if product needs additional testing or repairing.

If you are an international customer, please email the warranty department at sales@trail-gear.com to receive further instruction. International customers may have the option to field destroy an approved warranty to avoid costly return shipping. In this case, any shipping charges for replacement parts will be at the expense of the customer.

Write Your Own Review
Only registered users can write reviews. Please Sign in or create an account
COPYRIGHT © 2023 WHEELER'S OFF-ROAD. ALL RIGHTS RESERVED.