King Remote Reservoir Rear Shock Pair for 03+ 4Runner and 07-14 FJ Cruiser (25001-125A-EXT-or-125-EXT)

Rating:
% of 100
Backorder
SKU
RESERVOIR REAR SHOCK PAIR 10+ 4RUNNER
No Sales Tax in USA for Registered Customers

King Remote Reservoir Rear Shock Pair for 03+ 4Runner and 07-14 FJ Cruiser (25001-125A-EXT or 125-EXT)

King's remote reservoir rear shock set for the 2010+ 4Runner. These are available with or without the Compression Adjuster knob option. King Shocks wide range Compression Adjuster give you the ability to precisely adjust compression from super soft to super firm with the simple twist of a knob.

The clearly marked knob offers 16 positive clicks of finely tuned adjustment. You can soften your ride when just cruising or firm up the compression when hammering rough terrain or carrying additional payload. You'll have the ultimate in performance regardless of your pursuit.

The travel length of these shocks is 9.71". The collapsed length is 15.58"; extended length is 25.29". Sold as a Pair.


⚠ WARNING Cancer and Reproductive Harm - www.P65Warnings.ca.gov

  • Beautifully anodized aircraft quality billet aluminum construction
  • Clearly marked, ergonomic knob design is easy to use even while wearing gloves
  • Individual detents make each click of adjustment easy to feel while turning. Each of the twenty levels of adjustment offers precise compression damping control ranging from very soft to very firm
  • Wide range compression adjuster can be retro-fitted to existing shocks
  • Lightweight hard anodized 6063 aluminum alloy reservoirs dissipate heat quickly and will not rust due to gas charging contamination
  • High quality fittings are mated to Aeroquip high pressure hoses which resist abrasion and kinking
  • Internally threaded top cap design threads over the shock body to enable maximum piston travel inside the shock body
  • 2.5" Shock cylinders are precision bored to within +/- .001, then honed after cadmium plating to remove buildup for a tight piston seal and optimum valving function
  • Coilover shocks are machined with our own truncated thread design for ultimate strength and trouble free spring preload and height adjustments
  • Pinch bolt coil adjuster nut offers superior clamping force to retain your coil preload adjustments without crushing the threads like set screw style collars do
  • The heat treated 6061 aluminum alloy piston has our highly developed port configurations that contribute to the unique damping performance and famous King ride quality
  • Wear bands are made from a Rulon composite that offers incredible wear resistance, low deformation under load and high compressive strength. Overlapping end design enhances sealing
  • Large 3/4" or 7/8" diameter shafts have a minimum tensile strength of 100,000 pounds per square inch. They are hard chromed and micro-polished to a 6 RA finish for extended seal life
  • High strength rod end designed for proper clearance on your application. Steel Teflon lined spherical bearings for smooth articulation and long life with no metal to metal contact
  • Aluminum components and vehicle specific mounts are machined from aircraft quality billet. Front and rear kits all include all necessary vehicle specific mounting brackets and hardware along with detailed installation instructions. Technical support, if needed, is only a phone call or email away

  • 2003-Current Toyota 4Runner
  • 2007-2014 Toyota FJ Cruiser

If you have any questions on the use or installation of this product please contact our customer support at (559)-549-6737

See manufacturer for details.

Write Your Own Review
Only registered users can write reviews. Please Sign in or create an account
COPYRIGHT © 2023 WHEELER'S OFF-ROAD. ALL RIGHTS RESERVED.