2007+ Tundra Bilstein Shocks with Lift Block Kit
2007+ Tundra Bilstein Shocks & Lift Blocks
This Tundra shock and lift block kit is an extremely simple and affordable alternative to much higher priced systems. Bilstein's 5100 Height Adjustable shocks feature multiple snap-ring grooves on the body of the shock to accommodate different spring seat positions, allowing height adjustments from 0.5" to 2.5". Low Range Off-Road's 1" rear lift blocks are a great compliment for those front lift struts and matching rear shocks. We put these together into a convenient kit.
As with all 5100 series shocks, these new height adjustable shocks provide superior performance characteristics, feature bright zinc-plated bodies, and come with a lifetime aftermarket warranty. The shocks feature vehicle specific split digressive valving and Bilstein’s industry leading high gas pressure monotube technology.
Low Range Off-Road Rear Lift Blocks are not run of the mill suspension components.
Our Rear Lift Blocks are CNC cut and machined from solid 6061-T6 billet aluminum with a CNC-machined, pressed-in steel locating stud. Our machining and pressing technique achieves what others can't - consistence, accuracy, and quality.
Refinement of this design led to the inclusion of a 1-degree taper to achieve the least amount of drivetrain vibration. A CNC Machined "F" indicates which end of the block should be installed toward the front of the vehicle. We have worked closely with Toyota dealerships who demand the best components on their trucks to develop the best lift blocks around.
NOTE: These blocks provide 1" of rear lift when used with the tallest setting on Bilstein 5100 Height Adjustable Shocks. When used with shorter setting results may vary. In order to get 1" of lift our blocks are slightly taller than 1".
Includes:
- Front 07+ Tundra Bilstein 5100 Ride Height Adjustable Front Shocks, 0.5"-2.5" Lift (BE5-E428-H0)
- Rear 07+ Tundra Bilstein 5100 Series Rear Shocks for 0-1" Lift (BE5-E429-H0)
- Rear 1" LIft Blocks with U-bolt kit
- 4WD Models include Differential Drop Kit
Differential drop kits are not needed on 2WD models or if you have the 4WD model and are only going to adjust to the 0.5" height.
Installation requires a spring compressor to remove your factory spring from the factory coil spring assembly. Shock boots and a new upper nut are included.
Fits: 2007-2018 Toyota Tundra All Models including Rock Warrior.
- Front Shocks are Height Adjustable from .5" to 2.5" lift
- 1" Rear Lift Blocks are CNC machined from 6061-T6 aluminum
- 2007 Toyota Tundra
- 2008 Toyota Tundra
- 2009 Toyota Tundra
- 2010 Toyota Tundra
- 2011 Toyota Tundra
- 2012 Toyota Tundra
- 2013 Toyota Tundra
- 2014 Toyota Tundra
- 2015 Toyota Tundra
- 2016 Toyota Tundra
- 2017 Toyota Tundra
- 2018 Toyota Tundra
If you have any questions on the use or installation of this product please contact our customer support at (559)-549-6737
All products carry our 12 Month Limited Warranty. All warranties are limited to the original purchaser and are not transferable to subsequent owners of the product. The warranty period begins on the purchase date. Trail-Gear warrants that it will repair or replace, free of charge, any eligible product which, under normal conditions of use and service, proves to be defective in materials or workmanship. This warranty does not cover any labor costs incurred in diagnosis of defects, removal or reinstallation of a product, nor does it cover any other consequential expenses.
Please read and review our return and warranty requirement document before sending in products.
Warranty Exclusions
Trail-Gear Inc. warranty does not cover, and Trail-Gear Inc. shall not be liable for, any undertaking, representation, or agreements made by dealers or other third parties selling Trail-Gear products, except where such agreements are within the provisions of this Warranty.
Specifically excluded from this warranty are failures caused by lack of maintenance, misuse, negligence, modification, abuse, improper application, crash damage, installation or operation, or failures caused by unauthorized service or use of unauthorized parts.
Additionally excluded from this warranty are parts which are subject to normal wear and tear, such as bushings, fluids, hoses, gaskets, belts, etc. Products not manufactured by Trail-Gear Inc. are excluded from any warranty and shall be handled with the original manufacturer.
All parts used in a competitive racing environment are excluded from this warranty. If, after inspection, a part returned, under any warranty, is deemed to be ineligible for warranty repair or replacement, the part may be repaired or replaced for a discounted cost. Return shipping charges will apply. Any part for which a warranty replacement is sought must be returned to Trail-Gear Inc. before any replacement items can be shipped. All replacement parts shipped before the suspect part has been received and evaluated by Trail-Gear, MUST BE PAID IN FULL. In such a case, after the suspect part has been received and approved for a warranty replacement, the purchase price for the replacement will be refunded.
- Please contact Trail-Gear Inc. at 559-252-4950 or email sales@trail-gear.com prior to returning any product under warranty to verify that warranty is still in effect.
- Products must be shipped back to Trail-Gear Inc. at the expense of the customer.
- ATTN: WARRANTY
- 5356 E. Pine Avenue
- Fresno, CA 93727.
Ship all products to: - Please place a clearly marked copy of the original invoice inside the package.
- Please include a short note stating the problem you are experiencing.
If any of the above mentioned policy is not met, the package will be refused or warranty claim denied. By completing the steps above, this will ensure faster processing of your claim so that Trail-Gear can get your product back to you as quickly as possible. All warranties are generally processed within 2-3 business days of Trail-Gear receiving the parts from you. Additional delays may be incurred if product needs additional testing or repairing.
If you are an international customer, please email the warranty department at sales@trail-gear.com to receive further instruction. International customers may have the option to field destroy an approved warranty to avoid costly return shipping. In this case, any shipping charges for replacement parts will be at the expense of the customer.
