1995-1997 Toyota Tacoma PRO Kit w/Expedition Leaf Springs and Spring and Shackle Hangers
The All-Pro "Pro" kit replaces your weak Toyota factory springs, while improving the performance and ride of your 94-04 Tacoma, on-road and off-road, yielding a 0-3" suspension lift. Our kit includes our signature All-Pro Bilstein front coil-overs, Bilstein rear shocks, All-Pro Leaf springs, All-Pro U-bolt flip kit, (1) extended rear brake line, and shock mounts. Our rear leaf springs are factory length. These springs have a special torque leaf to reduce axle wrap. Springs come with new poly bushings and sleeves. Use of lifting blocks or shackle flip kits void all warranty on All-Pro Leaf Springs
Mounting our springs on 95-97 Tacomas will require new front spring hangers 2" forward (hole to hole) from stock, and the rear shackle hangers moved back 1".
All-Pro's Standard Duty leaf springs are NOT designed for heavy weight carrying capability. They are designed for ride quality and flex. For those carrying heavier loads such as rigs fully loaded for long-term expeditions, we offer an Expedition leaf pack.
The All-Pro Expedition leaf spring pack will consistently carry 300-450 lbs, without sagging, providing a smooth ride and the flex you are looking for on your off-road adventures.
We recommend adding a set of All-Pro Upper Control Arms for 2-3" lifts to achieve factory alignment.
WARNING:Cancer and Reproductive Harm -www.P65Warnings.ca.gov
Complete Bilstein kit includes everything you need to improve the performance of your 95-04 Tacoma. Provides 0-3" lift. Coil-overs come with 550 lb coil. Add a set of All-Pro Upper Control Arms for 2-3" lifts to achieve factory alignment.
- All-Pro Bilstein Coil-Overs (pair)
- Upgrade to 650 lb coil **
- Bilstein 33-186542 (pair)
- All-Pro Leaf Spring Pack (pair)
- Rear Extended Brake Line (1 ea)
- All-Pro U-Bolt Flip Kit (1 ea)
- All-Pro shock mounts (pair)
- Spanner Wrench
- Spring & Shackle Hangers (95-97 kits only)
**We recommend running a 650 lb coil if you are running an aftermarket steel bumper and winch.
- 1995-1997 Toyota Tacoma
All products carry our 12 Month Limited Warranty. All warranties are limited to the original purchaser and are not transferable to subsequent owners of the product. The warranty period begins on the purchase date. Trail-Gear warrants that it will repair or replace, free of charge, any eligible product which, under normal conditions of use and service, proves to be defective in materials or workmanship. This warranty does not cover any labor costs incurred in diagnosis of defects, removal or reinstallation of a product, nor does it cover any other consequential expenses.
Please read and review our return and warranty requirement document before sending in products.
Warranty Exclusions
Trail-Gear Inc. warranty does not cover, and Trail-Gear Inc. shall not be liable for, any undertaking, representation, or agreements made by dealers or other third parties selling Trail-Gear products, except where such agreements are within the provisions of this Warranty.
Specifically excluded from this warranty are failures caused by lack of maintenance, misuse, negligence, modification, abuse, improper application, crash damage, installation or operation, or failures caused by unauthorized service or use of unauthorized parts.
Additionally excluded from this warranty are parts which are subject to normal wear and tear, such as bushings, fluids, hoses, gaskets, belts, etc. Products not manufactured by Trail-Gear Inc. are excluded from any warranty and shall be handled with the original manufacturer.
All parts used in a competitive racing environment are excluded from this warranty. If, after inspection, a part returned, under any warranty, is deemed to be ineligible for warranty repair or replacement, the part may be repaired or replaced for a discounted cost. Return shipping charges will apply. Any part for which a warranty replacement is sought must be returned to Trail-Gear Inc. before any replacement items can be shipped. All replacement parts shipped before the suspect part has been received and evaluated by Trail-Gear, MUST BE PAID IN FULL. In such a case, after the suspect part has been received and approved for a warranty replacement, the purchase price for the replacement will be refunded.
- Please contact Trail-Gear Inc. at 559-252-4950 or email [email protected] prior to returning any product under warranty to verify that warranty is still in effect.
- Products must be shipped back to Trail-Gear Inc. at the expense of the customer.
- ATTN: WARRANTY
- 5356 E. Pine Avenue
- Fresno, CA 93727.
Ship all products to: - Please place a clearly marked copy of the original invoice inside the package.
- Please include a short note stating the problem you are experiencing.
If any of the above mentioned policy is not met, the package will be refused or warranty claim denied. By completing the steps above, this will ensure faster processing of your claim so that Trail-Gear can get your product back to you as quickly as possible. All warranties are generally processed within 2-3 business days of Trail-Gear receiving the parts from you. Additional delays may be incurred if product needs additional testing or repairing.
If you are an international customer, please email the warranty department at [email protected] to receive further instruction. International customers may have the option to field destroy an approved warranty to avoid costly return shipping. In this case, any shipping charges for replacement parts will be at the expense of the customer.