Weld-On Rock Sliders
Rock sliders are a great way of protecting the rocker panels of your Toyota Pickup, 4Runner, Tacoma, or FJ Cruiser. Trail-Gear has designed its Rock Sliders to be the strongest on the market, starting with 1-3/4" OD x .120 wall 1035 DOM. Trail-Gear Rock Sliders are the only rock sliders on the market that use 1035 DOM tubing. Based on our testing we believe that using DOM tubing in this application makes our rock sliders the strongest, most affordable available today. Other companies try and cut manufacturing costs by using less expensive HREW tubing, but the end result is always the same, under extreme stress the HREW tubing splits down the seam, failing.
Trail-Gear's heavy-duty design can take a pounding from the rocks while keeping body damage to a minimum, allowing you to slide over or between rocks on even the hardest trails without damage. Trail-Gear rock sliders are strong enough to hold the entire weight of the truck, a high-lift jack can be used anywhere along the slider for repositioning the rig on the trail, or simply high-lifting it up for repairs.
The mounting legs are not welded onto the slider but are shipped loose so that legs can be attached in different mounting positions. Mounting legs are pre-notched on one side and can be trimmed if needed on the opposite side. Mounting legs are 11-1/4" long, so they allow the sliders to stick out far enough to be used as a step if desired. Six mounting legs, three per side, are provided with the 58" and the 67" sliders, and eight mounting legs, four per side are provided with our 78" sliders. Trail-Gear rock sliders are sold in pairs, shipped raw with no finish, and are lightly oiled to prevent rusting.
Available in the following sizes:
- 58" Shortbed/4Runner, Pair, 120001-1-KIT
- 67" 84-88 Xtra-Cab, Pair, 120002-1-KIT
- 78" 88-04 Xtra-Cab, Pair, 120003-1-KIT
The following rock sliders can also be used on Toyota Tacomas:
- 58" Sliders (120001-1-KIT) - Short Bed Single Cab Tacoma
- 78" Sliders (120003-1-KIT) - Extra Cab/Double Cab Tacoma
WARNING Cancer and Reproductive Harm - www.P65Warnings.ca.gov
- Made out of 1 3/4" OD x .120 wall 1035 DOM
- Mounting legs are 11 1/4" long
- Six mounting legs, three per side, are provided with the 58" and the 67" sliders, and eight mounting legs, four per side are provided with our 78" sliders
- Sold in pairs, shipped raw with no finish, and lightly oiled to prevent rusting
- 1979-1995 Toyota Pickup (All Engines)
- 1985-1995 Toyota 4Runner (All Engines)
- 1995-2013 Toyota Tacoma (All Engines)
All products carry our 12 Month Limited Warranty. All warranties are limited to the original purchaser and are not transferable to subsequent owners of the product. The warranty period begins on the purchase date. Trail-Gear warrants that it will repair or replace, free of charge, any eligible product which, under normal conditions of use and service, proves to be defective in materials or workmanship. This warranty does not cover any labor costs incurred in diagnosis of defects, removal or reinstallation of a product, nor does it cover any other consequential expenses.
Trail-Gear Inc. warranty does not cover, and Trail-Gear Inc. shall not be liable for, any undertaking, representation, or agreements made by dealers or other third parties selling Trail-Gear products, except where such agreements are within the provisions of this Warranty.
Specifically excluded from this warranty are failures caused by lack of maintenance, misuse, negligence, modification, abuse, improper application, crash damage, installation or operation, or failures caused by unauthorized service or use of unauthorized parts.
Additionally excluded from this warranty are parts which are subject to normal wear and tear, such as bushings, fluids, hoses, gaskets, belts, etc. Products not manufactured by Trail-Gear Inc. are excluded from any warranty and shall be handled with the original manufacturer.
All parts used in a competitive racing environment are excluded from this warranty. If, after inspection, a part returned, under any warranty, is deemed to be ineligible for warranty repair or replacement, the part may be repaired or replaced for a discounted cost. Return shipping charges will apply. Any part for which a warranty replacement is sought must be returned to Trail-Gear Inc. before any replacement items can be shipped. All replacement parts shipped before the suspect part has been received and evaluated by Trail-Gear, MUST BE PAID IN FULL. In such a case, after the suspect part has been received and approved for a warranty replacement, the purchase price for the replacement will be refunded.
- Please contact Trail-Gear Inc. at 559-252-4950 or email [email protected] prior to returning any product under warranty to verify that warranty is still in effect.
- Products must be shipped back to Trail-Gear Inc. at the expense of the customer.
- ATTN: WARRANTY
- 5356 E. Pine Avenue
- Fresno, Ca 93727.
Ship all products to:
- Please place a clearly marked copy of the original invoice on the outside of the package.
- Please include a short note stating the problem you are experiencing.
If any of the above mentioned policy is not met, the package will be refused or warranty claim denied. By completing the steps above, this will ensure faster processing of your claim so that Trail-Gear can get your product back to you as quickly as possible. All warranties are generally processed within 2-3 business days of Trail-Gear receiving the parts from you. Additional delays may be incurred if product needs additional testing or repairing.
If you are an international customer, please email the warranty department at [email protected] to receive further instruction. International customers may have the option to field destroy an approved warranty to avoid costly return shipping. In this case, any shipping charges for replacement parts will be at the expense of the customer.