Camburg Performance Balljoint Upper Arm Kit for 07+ Tundra 2WD/4WD (310083)
Camburg Performance Balljoint Upper Arm Kit for 07+ Tundra 2WD/4WD (310083)
Looking to change out your upper control arms without hitting the bank account too hard? Camburg offers a performance upper arm that has Moog greasable ball joints pre-installed. These arms provide many of the same benefits the uniball upper arms offer at a much lower cost. By building an upper arm to re-angle the ball-joint, you re able to gain more wheel travel and keep the joint in its normal operating range.
These arms also correct the suspension geometry on lifted trucks by increasing much needed caster which improves handling and allows for a wider range of alignment adjustment. The tubular construction also gives you more tire and shock clearance compared to the stock stamped arm.
WARNING Cancer and Reproductive Harm - www.P65Warnings.ca.gov
DETAILS
- 4130 Chromoly Construction
- CNC Bent Tubes MIG Welded
- Polyurethane Frame Pivot Bushings with Greasable Zerk Fittings
- Moog Ball Joints Pre-Installed
- Billet Aluminum Ball Joint Covers
- Matte Black Powder-Coating
- All Necessary Hardware Included - Ready to Install
- Made in the USA In-House
- For 1-3" Lifts Only
INCLUDES
- Upper Arms
- Hardware Kit
- Billet Ball Joint Covers
TECH SPECS
- Track Width: Stock
- Wheel Size: 17-20-In
- Max Backspacing: 6.00-In
- Tire Size: 33-35-In
- 2007-2016 Toyota Tundra