Wheeler's Trail-Pro 2.5" Lift Kit for 2010+ 4Runner
Trail-Pro Lift Kit for 2010+ 4Runner by Wheeler's Off-Road
Wheeler's Off-Road likes to keep things simple. We also think you deserve the best price value for your dollar when you upgrade your 4Runner. The Trail-Pro complete lift kit is hundreds of dollars less than comparable products from our competitors yet we actually include more high-performance products than other kits.
Who doesn't love a comprehensive all-in-one lift kit? Don't waste time piecing together suspension components. Instead, install one of these Trail-Pro lift kits built by Wheeler's Off-road for your 5th Generation Toyota 4Runner. All you need to do is decide which rear coil springs fit your needs, whether or not you need aftermarket upper control arms, and which spring rate you need on the front struts.
Wheeler's Off-Road Trail-Pro Lift Kits use Bilstein 6112 Series front struts and coil springs. These are some of the best performing off-road struts ever made. Front bumpstops are included. For the rear suspension, we provide a set of SuperBump bumpstops with your choice of either Wheeler's T12 or T13 coil springs. T13 springs provide approximately 1.5" of lift. T12 springs are taller and will give about 2.5" of lift. Lift heights vary depending on vehicle specifics.
Trail-Pro Lift Kits also come optionally with All-Pro Upper Control Arms. Upgrading your control arms is always a good idea. All-Pro 4130 Chromoly Upper A-Arm kits are designed to correct suspension geometry on lifted applications to achieve the correct alignment specs. These arms use a burly 1.25″ uni-ball and durable polyurethane bushings.
No 4Runner lift is complete without a carrier bearing drop and extended brake lines. Trail-Pro lifts include these often overlooked items because we want you to enjoy your new lift.
Let us assemble your struts! If you select Assembled Struts we will build your Bilstein 6112s at the top clip setting for the most lift. This is our preferred height to achieve a near-level stance with All-Pro leaf springs.
If you would like to raise the front slightly more for a level stance we recommend 3/8" top plate spacers available from Wheeler's Off-road.
WARNING Cancer and Reproductive Harm - www.P65Warnings.ca.gov
- Bilstein 6112 Front Coil and Strut Kit
- Optional Strut Assembly
- Bilstein Rear 5160 Shocks
- Optional All-Pro Upper Control Arms
- Wheelers Rear T13 or T12 coil choice
- Front and Rear Superbump Bump Stops
- Front Differential Drop Kit
- 2010 Toyota 4Runner
- 2011 Toyota 4Runner
- 2012 Toyota 4Runner
- 2013 Toyota 4Runner
- 2014 Toyota 4Runner
- 2015 Toyota 4Runner
- 2016 Toyota 4Runner
- 2017 Toyota 4Runner
- 2018 Toyota 4Runner
- 2019 Toyota 4Runner
- 2020 Toyota 4Runner
If you have any questions on the use or installation of this product please contact our customer support at (559)-549-6737
All products carry our 12 Month Limited Warranty. All warranties are limited to the original purchaser and are not transferable to subsequent owners of the product. The warranty period begins on the purchase date. Trail-Gear warrants that it will repair or replace, free of charge, any eligible product which, under normal conditions of use and service, proves to be defective in materials or workmanship. This warranty does not cover any labor costs incurred in diagnosis of defects, removal or reinstallation of a product, nor does it cover any other consequential expenses.
Trail-Gear Inc. warranty does not cover, and Trail-Gear Inc. shall not be liable for, any undertaking, representation, or agreements made by dealers or other third parties selling Trail-Gear products, except where such agreements are within the provisions of this Warranty.
Specifically excluded from this warranty are failures caused by lack of maintenance, misuse, negligence, modification, abuse, improper application, crash damage, installation or operation, or failures caused by unauthorized service or use of unauthorized parts.
Additionally excluded from this warranty are parts which are subject to normal wear and tear, such as bushings, fluids, hoses, gaskets, belts, etc. Products not manufactured by Trail-Gear Inc. are excluded from any warranty and shall be handled with the original manufacturer.
All parts used in a competitive racing environment are excluded from this warranty. If, after inspection, a part returned, under any warranty, is deemed to be ineligible for warranty repair or replacement, the part may be repaired or replaced for a discounted cost. Return shipping charges will apply. Any part for which a warranty replacement is sought must be returned to Trail-Gear Inc. before any replacement items can be shipped. All replacement parts shipped before the suspect part has been received and evaluated by Trail-Gear, MUST BE PAID IN FULL. In such a case, after the suspect part has been received and approved for a warranty replacement, the purchase price for the replacement will be refunded.
- Please contact Trail-Gear Inc. at 559-252-4950 or email [email protected] prior to returning any product under warranty to verify that warranty is still in effect.
- Products must be shipped back to Trail-Gear Inc. at the expense of the customer.
- ATTN: WARRANTY
- 5356 E. Pine Avenue
- Fresno, CA 93727.
Ship all products to:
- Please place a clearly marked copy of the original invoice inside the package.
- Please include a short note stating the problem you are experiencing.
If any of the above mentioned policy is not met, the package will be refused or warranty claim denied. By completing the steps above, this will ensure faster processing of your claim so that Trail-Gear can get your product back to you as quickly as possible. All warranties are generally processed within 2-3 business days of Trail-Gear receiving the parts from you. Additional delays may be incurred if product needs additional testing or repairing.
If you are an international customer, please email the warranty department at [email protected] to receive further instruction. International customers may have the option to field destroy an approved warranty to avoid costly return shipping. In this case, any shipping charges for replacement parts will be at the expense of the customer.