Camburg has taken their successful uniball upper a-arms to the next level. These performance upper arms now use a much larger and stronger uniball bearing. This bearing allows for more mis-alignment for maximum wheel travel and uses their new flush mount hardware that gives you more clearance between the arm and inner fender.
These arms correct the suspension geometry by increasing much needed caster and allow for a wider range of alignment adjustment. The tubular construction also gives you more tire & shock clearance compared to the stock stamped arm. These arms are fully rebuildable, and may need that service occasionally depending on severity of use.
We have rebuild kits and uniballs available separately.
The uni-balls can produce a little noise on occasion, see below for Tri-Flow lubricant.
FREE Ground Shipping to the Lower 48!