Home - Return to Previous Page
Additional Images

Camburg Uni-Ball Upper Control Arm Set for 1999-2006 Tundra (310006)

CAM 310006

Camburg has taken their successful uniball upper a-arms to the next level. These performance upper arms now use a much larger and stronger uniball bearing. This bearing allows for more mis-alignment for maximum wheel travel and uses their new flush mount hardware that gives you more clearance between the arm and inner fender.

These arms correct the suspension geometry by increasing much needed caster and allow for a wider range of alignment adjustment. The tubular construction also gives you more tire & shock clearance compared to the stock stamped arm. These arms are fully rebuildable, and may need that service occasionally depending on severity of use.

We have rebuild kits and uniballs available separately.

The uni-balls can produce a little noise on occasion, see below for Tri-Flow lubricant.

FREE Ground Shipping to the Lower 48!

Shipping: FREE Ground Shipping to the Lower 48!
Pricing: $664.00
Free Shipping!


  • 2WD/4WD
  • Increases usable wheel travel
  • Corrects camber & castor
  • Tubular 4130 chromoly upper a-arms
  • Stainless steel heat-treated uniball spacers
  • FK Uniballs
  • Energy Suspension polyurethane bushings with thick inner sleeves
  • Includes grade 8 and high strength 12pt hardware
  • Stainless steel ABS line clamps
  • Powder coated gray finish
  • Eliminates weak factory joints
  • Made in the USA
  • FREE Ground Shipping to the Lower 48!


  • (2) Upper Arms
  • Hardware Kit

Technical Specs

  • Track Width: Stock
  • Wheel Size: 16x8 or 17x8
  • Max Backspacing: 4.50 in
  • Tire Size: 285/75/16 or 285/70/17

Shipping Information

  • Item Requires Shipping
  • 20.0 lbs.
  • W13.0000” x H7.0000” x L13.0000”
  • Free Shipping!
  • FREE Ground Shipping to the Lower 48!