Description: Machined from solid steel and zinc plated for a long lasting finish. This shim bolts to the bottom of your leaf pack using the included new leaf spring center bolt. This part can be used to help...More Details »
Description: Includes two 3 degree zinc coated steel pinion shims with center pins. 60mm width. Center pin bore is counter sunk slightly on one side to relieve side load on the center pin head. These are the...More Details »
Description: Grade 5 hardened ROUND radius U-Bolts with hardware. Custom made in the USA to fit Toyota U-Bolt Flip applications. U-Bolts and hardware are zinc coated for corrosion resistance.
Each set...More Details »
Description: Sold in pairs. Includes (2) bolts with nuts and washers. On the 05+ Tacoma, these fit your rear spring main eye mounts and will also fit your shackle to spring and shackle to frame mounting points...More Details »
Description: This is Timbren's complete U-Bolt Flip Kit with Off-Road Bumpstops for 05+ Tacoma. The Active Off-Road Bumpstops offer off-road enthusiasts greater control over their vehicles suspension travel....More Details »
Description: This leaf spring bushing kit services a pair of 60mm width Toyota leaf springs with standard factory sized spring eyes. Includes 8 graphite impregnated polyurethane bushings and 4 DOM sleeves.
Description: Turns your Ubolts so they are facing up gaining you ground clearance under your axle and gets your Ubolts out of the rocks!
We use quality clear zinc plated spring plates and Ubolts for a long...More Details »
Description: These are required when running the ICON Tacoma Hydraulic Bump Stop Kit. Provides additional surface area for the hydraulic bump stop to contact. Also flips the u-bolts to provide more ground...More Details »
Description: Grade 5 hardened square radius U-Bolts with hardware. Zinc coated for corrosion resistance. 9/16" x 7.75" long. Includes 4 U-Bolts, 8 High Nuts and 8 Washers. These square bolts are for standard...More Details »
Description: Black graphite impregnated polyurethane bushings with sleeves. The old CS047 springs come from OME with factory style bushings already installed in the front main eye, but no bushings in the rear...More Details »
Description: Available in 6.75", 7.75", 8.5" 9.5"; select your size when ordering.
Grade 5 hardened SQUARE radius U-Bolts with hardware. These fit Tacoma 4x4 / PreRunner, Tundra, and many other...More Details »
Description: This kit flips your u-bolts for increased ground clearance and protection of your u-bolt threads. The kit includes Timbren's super tough rubber progressive off-road bump stops and mounting...More Details »
Description: This kit flips your u-bolts for increased ground clearance and protection of your u-bolt threads. The plates are drilled and tapped for mounting a cushion type bump stop such as our SuperBumps...More Details »