Sky's Off-Road Design - Suzuki Samurai YJ Spring Swap Combo (Dual Shackle Front Kit - Single Shackl
Sky's Off-Road Design - Suzuki Samurai YJ Spring Swap Kit Combo (Dual Shackle Front Kit - Single Shackle Rear Kit)
Upgrade your stock Samurai springs to wider and longer YJ springs for more flex and a better ride. This combo kit set is designed for 1987-1995 Wrangler YJ leaf springs which must be sourced separately.
The front kit moves the front axle 1-inch forward and ships with dual shackles that can be set up in a missing link configuration for added travel or bolted to the bump stop to act as a frame extension.
The rear kit ships with single shackles and can move the axle back 1-inch if desired.
Both kits contain all necessary mounting components and hardware necessary to install YJ springs on their respective axles, delivering around 2.5-inches of lift.
- NO INSTRUCTIONS ARE PROVIDED WITH THIS KIT!
- All bump stops, hangers, pads and shackles arrive raw steel and should be painted or powdercoated before being exposed to the elements.
- The front missing link configuration is not recommended for on-road use!
- YJ Springs are NOT INCLUDED in this kit and must be sourced separately!
WARNING Cancer and Reproductive Harm - www.P65Warnings.ca.gov
- Components are Raw Steel
- All Bolts, Nuts and Washers are Included
- 1986 Suzuki Samurai
- 1987 Suzuki Samurai
- 1988 Suzuki Samurai
- 1989 Suzuki Samurai
- 1990 Suzuki Samurai
- 1991 Suzuki Samurai
- 1992 Suzuki Samurai
- 1993 Suzuki Samurai
- 1994 Suzuki Samurai
- 1995 Suzuki Samurai
If you have any questions on the use or installation of this product please contact our customer support at (559)-549-6737
All products carry our 12 Month Limited Warranty. All warranties are limited to the original purchaser and are not transferable to subsequent owners of the product. The warranty period begins on the purchase date. Trail-Gear warrants that it will repair or replace, free of charge, any eligible product which, under normal conditions of use and service, proves to be defective in materials or workmanship. This warranty does not cover any labor costs incurred in diagnosis of defects, removal or reinstallation of a product, nor does it cover any other consequential expenses.
Trail-Gear Inc. warranty does not cover, and Trail-Gear Inc. shall not be liable for, any undertaking, representation, or agreements made by dealers or other third parties selling Trail-Gear products, except where such agreements are within the provisions of this Warranty.
Specifically excluded from this warranty are failures caused by lack of maintenance, misuse, negligence, modification, abuse, improper application, crash damage, installation or operation, or failures caused by unauthorized service or use of unauthorized parts.
Additionally excluded from this warranty are parts which are subject to normal wear and tear, such as bushings, fluids, hoses, gaskets, belts, etc. Products not manufactured by Trail-Gear Inc. are excluded from any warranty and shall be handled with the original manufacturer.
All parts used in a competitive racing environment are excluded from this warranty. If, after inspection, a part returned, under any warranty, is deemed to be ineligible for warranty repair or replacement, the part may be repaired or replaced for a discounted cost. Return shipping charges will apply. Any part for which a warranty replacement is sought must be returned to Trail-Gear Inc. before any replacement items can be shipped. All replacement parts shipped before the suspect part has been received and evaluated by Trail-Gear, MUST BE PAID IN FULL. In such a case, after the suspect part has been received and approved for a warranty replacement, the purchase price for the replacement will be refunded.
- Please contact Trail-Gear Inc. at 559-252-4950 or email [email protected] prior to returning any product under warranty to verify that warranty is still in effect.
- Products must be shipped back to Trail-Gear Inc. at the expense of the customer.
- ATTN: WARRANTY
- 5356 E. Pine Avenue
- Fresno, CA 93727.
Ship all products to:
- Please place a clearly marked copy of the original invoice inside the package.
- Please include a short note stating the problem you are experiencing.
If any of the above mentioned policy is not met, the package will be refused or warranty claim denied. By completing the steps above, this will ensure faster processing of your claim so that Trail-Gear can get your product back to you as quickly as possible. All warranties are generally processed within 2-3 business days of Trail-Gear receiving the parts from you. Additional delays may be incurred if product needs additional testing or repairing.
If you are an international customer, please email the warranty department at [email protected] to receive further instruction. International customers may have the option to field destroy an approved warranty to avoid costly return shipping. In this case, any shipping charges for replacement parts will be at the expense of the customer.