Home - Brands - Camburg
Additional Images

Camburg Toyota Tundra 2wd/4wd 07-18 Performance Balljoint Upper Arm Kit

CAM 310083

Looking to change out your upper control arms without hitting the bank account too hard? Camburg offers a performance upper arm that has Moog grease-able ball joints pre-installed. These arms provide many of the same benefits the uniball upper arms offer at a much lower cost. By building an upper arm to re-angle the ball-joint, you re able to gain more wheel travel and keep the joint in its normal operating range.

These arms also correct the suspension geometry on lifted trucks by increasing much needed caster which improves handling and allows for a wider range of alignment adjustment. The tubular construction also gives you more tire & shock clearance compared to the stock stamped arm.

 WARNING: This product can expose you to a chemical or chemicals such as Talc, which is known to the State of California to cause cancer, birth defects and or reproductive harm. For more information, go to www.P65Warnings.ca.gov.

Pricing: $569.00


Includes a full hardware and installation kit that has polyurethane frame pivot bushings, frame pivot sleeves, zirks, castle nuts, etc. There is a bracket on the arms to secure your factory ABS wire. Includes billet aluminum ball joint caps.


Camburg UCA's

Ball-Joint Arm Specs:
  • Tubular chromoly upper a-arms
  • Re-angled ball-joint to increase wheel travel over stock
  • Increase in positive caster geometry for better handling
  • Energy Suspension polyurethane bushings with thick inner sleeves
  • Uses factory style replacement (MOOG) ball-joints and hardware
  • Stainless steel ABS line clamps
  • Powder coated black finish

Camburg UCA

Shipping Information

  • Item Requires Shipping
  • 20.0 lbs.
  • W5.0000” x H7.0000” x L17.0000”