Remote Reservoir Rear Shock Pair for 1996-2002 4Runner (25001-334 -or 334A)

SKU: KING 25001-334 -or 334A

King’s remote reservoir rear shock set for the 96-02 4Runner. These are available with or without the Compression Adjuster knob option. King Shocks’ Wide Range Compression Adjuster give you the ability to precisely adjust compression from super soft to super firm with the simple twist of a knob. The clearly marked knob offers 16 positive clicks of finely tuned adjustment. You can soften your ride when just cruising or firm up the compression when hammering rough terrain or carrying additional payload. You’ll have the ultimate in performance regardless of your pursuit.

These measure 13.83" x 22.367".

Sold as a Pair.

FREE Ground Shipping to the Lower 48!

WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov.

Shipping: FREE Ground Shipping to the Lower 48!

Pricing: $901.55

Description
Warranty
Details
Shipping

Description

Lightweight hard anodized 6063 aluminum alloy reservoirs dissipate heat quickly and will not rust due to gas charging contamination
High quality fittings are mated to Aeroquip high pressure hoses which resist abrasion and kinking
Internally threaded top cap design threads over the shock body to enable maximum piston travel inside the shock body
2.5" Shock cylinders are precision bored to within +/- .001, then honed after cadmium plating to remove buildup for a tight piston seal and optimum valving function
Coilover shocks are machined with our own truncated thread design for ultimate strength and trouble free spring preload and height adjustments
Pinch bolt coil adjuster nut offers superior clamping force to retain your coil preload adjustments without crushing the threads like set screw style collars do
The heat treated 6061 aluminum alloy piston has our highly developed port configurations that contribute to the unique damping performance and famous King ride quality
Wear bands are made from a Rulon composite that offers incredible wear resistance, low deformation under load and high compressive strength. Overlapping end design enhances sealing
Large 3/4" or 7/8" diameter shafts have a minimum tensile strength of 100,000 pounds per square inch. They are hard chromed and micro-polished to a 6 RA finish for extended seal life.
High strength rod end designed for proper clearance on your application. Steel Teflon lined spherical bearings for smooth articulation and long life with no metal to metal contact.
Aluminum components and vehicle specific mounts are machined from aircraft quality billet. Front and rear kits all include all necessary vehicle specific mounting brackets and hardware along with detailed installation instructions. Technical support, if needed, is only a phone call or email away.
FREE Ground Shipping to the Lower 48!

Warranty

Plating, anodizing and other coatings used are warranted to be free from defects at time of sale only. They may degrade over time depending on environmental conditions beyond the control of King Shocks. King Shocks’ products are warranted to be free from manufacturing defects for a period of 90 days from date of purchase. The warranty does not cover; crash damage, abuse, modified and/or use of non- King parts, lack of maintenance or incorrect supplied dimensions and or specifications on custom orders. The user shall determine the suitability of the product for his or her intended use and shall assume all risk and liability in connection therewith.