Home - Return to Previous Page
Additional Images

Camburg Upper Control Arm 1.50 Uni-Ball Set for 2007+ Tundra (310041)

CAM 310041

Camburg has taken their successful uniball upper a-arms to the next level. These performance upper arms now use a much larger and stronger 1.50' uniball bearing. This bearing allows for more mis-alignment for maximum wheel travel and uses their new flush mount hardware that gives you more clearance between the arm and inner fender.

These arms correct the suspension geometry by increasing much needed caster and allow for a wider range of alignment adjustment. The tubular construction also gives you more tire & shock clearance compared to the stock stamped arm. These arms are fully rebuildable, and may need that service occasionally depending on severity of use.

We have rebuild kits and uniballs available separately.

The uni-balls can produce a little noise on occasion, see below for Tri-Flow lubricant.

FREE Ground Shipping to the Lower 48!

 WARNING: This product can expose you to a chemical or chemicals such as Talc, which is known to the State of California to cause cancer, birth defects and or reproductive harm. For more information, go to www.P65Warnings.ca.gov.

Shipping: FREE Ground Shipping to the Lower 48!
Pricing: $664.00
Qty:

Description

  • 2WD/4WD
  • Increases usable wheel travel
  • Corrects camber & castor
  • Tubular 4130 chromoly upper a-arms
  • Stainless steel heat-treated uniball spacers
  • FK 1.50' Uniballs
  • Energy Suspension polyurethane bushings with thick inner sleeves
  • Includes grade 8 and high strength 12pt hardware
  • Stainless steel ABS line clamps
  • Powder coated gray finish
  • Eliminates weak factory joints
  • Maximum wheel backspacing = 6.50"
  • Made in the USA
  • FREE Ground Shipping to the Lower 48!

**Note: These arms are designed to be used with stock unmodified spindles or Camburg performance lift spindles in conjunction with an approved 2"-3" lift bolt-in coilover. They were not designed to be used in conjunction with other suspension kits or spacer type kits. Call Camburg for specifics.

Includes

  • (2) Upper Arms
  • Hardware Kit

Technical Specs

  • Track Width: Stock
  • Wheel Size: 17-20 in
  • Max Backspacing: 6.00 in
  • Tire Size: 33-34in

Shipping Information

  • Item Requires Shipping
  • 25.0 lbs.
  • W15.0000” x H7.0000” x L17.0000”
  • This item ships in its own box.
  • FREE Ground Shipping to the Lower 48!