Home - Return to Previous Page
Click on image to zoom

Bilstein 5100 Rear Shock Pair for 1995-2004 Tacoma


We've got these performance valved Bilstein 5100 rear shocks for 95-04 Tacoma in a couple different configurations:

Bilstein Part #'s 33-247717/33-247724. A newer offering from Bilstein, these 5100 rear shocks are able to accommodate 1"-1.5" of rear lift according to Bilstein's application sheet. Customer's actually order these for lift heights ranging from 1" to 2.25" with great results.

Bilstein Part #'s BE5-D559/D560. These Bilstein 5100 shocks are the original 5100's that have been around for years offered exclusively through Race Car Dynamics. These shocks are a little longer than the newer 33- series shocks and are good for those 1.5"-3" lifts.

 WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov.

Was: $164.00
Sale: $150.00
Save: 9%
Save: $14.00

Customize Your Item

- Please Choose -
 * required


Collapsed / Extended lengths:
  • BIL 33-247717 5100 Rear Shock, 95-04 Tacoma, Passenger Side, 14.07" X 22.09"
  • BIL 33-247724 5100 Rear Shock, 95-04 Tacoma, Driver Side, 13.62" X 21.26"
  • BIL BE5-D559-TO 5100 Rear Shock, 95-04 Tacoma, Driver Side, 13.9" x 21.6"
  • BIL BE5-D560-TO 5100 Rear Shock, 95-04 Tacoma, Passenger Side, 14.7" x 22.6"


  • Limited Lifetime Warranty

**Note: These shocks may only be used for specific applications. Due to the variations in lift kit manufacturers’ systems, it is the responsibility of the installer/end user to confirm that the shocks are dimensionally correct. Most lift kits require lowered bump stops to compensate for longer shocks mounted into the OEM location. BILSTEIN will not be liable for damage caused by a full compression impact of the shock absorber.


Monotube vs. Twintube:

How are BILSTEIN Shock Absorbers made:


Shipping Information

  • Item Requires Shipping
  • 11.0 lbs.
  • W6.0000” x H6.0000” x L28.0000”
  • This item ships in its own box.