Description: This kit mounts under the upper coil support plate and preloads the coil, replacing the factory rubber coil isolator. This provides a slightly firmer ride but is not uncomfortable. It will...More Details »
Description: This kit mounts on top of the upper strut coil support plate and d oes NOT affect the actual spring rate .This means the ride firmness will feel similar to stock after installation of this...More Details »
Description: A pair of polyurethane coil spacers for your rear suspension. These easy to install spacers go on top of your rear coil springs and provide 1.5" of lift.
WARNING: (For California...More Details »
Description: A CNC machined aluminum spacer, 1/2" thick.
For front suspension
Includes longer strut plate studs
Fits on top of the upper strut plate
Provides approx 3/4"-7/8" lift. Does not...More Details »
Choose from our super tough polyurethane formula or black anodized billet aluminum.
Description: We have these available in our special polyurethane formula or black anodized billet CNC machined aluminum. These are 1/2" thick. For your front suspension. Stackable. Fits on top of the upper...More Details »
Choose from our super tough polyurethane formula or black anodized billet aluminum.
Description: We have these available in our special polyurethane formula or black anodized billet CNC machined aluminum. These are 1/2" thick. For your front suspension. Stackable. Fits on top of the upper...More Details »
Description: Machined aluminum spacer pair, 1/4" thick.
For your front suspension
Stackable
Fits on top of the upper strut plate
Single 1/4" spacers do not normally require longer studs...More Details »
Description: A machined aluminum spacer, 1/4" thick.
WARNING: This product can expose you to a chemical or chemicals such as Talc, which is known to the State of California to cause cancer, birth...More Details »
Choose from our super tough polyurethane formula or black anodized billet aluminum.
Description: We have these available in our special polyurethane formula or black anodized billet CNC machined aluminum. These are 1/4" thick. For your front suspension. Stackable. Fits on top of the upper...More Details »
Description: This lift kit will raise the front of the vehicle 2.5" and the rear 1" for a level vehicle stance. Comes with all pieces shown, plus instructions. Daystar spacers are made out of high density...More Details »
Description: Our custom packaged kit includes separate top spacers and preload spacers for the best on and off road performance and reliability. Comes with instructions.
Requires disassembly of the front...More Details »
Description: WITHOUT XREAS OR AIR LEVELING SUSPENSION OPTION. This kit lifts the 4Runner & FJ Cruiser 3" and levels the vehicle - Fits 2wd and 4wd - Uses steel and cast iron spacers to lift the front and...More Details »
Choose from our super tough polyurethane formula or black anodized billet aluminum.
Description: We have these available in our special polyurethane formula or black anodized billet CNC machined aluminum. These are 3/8" thick. For your front suspension. Stackable. Fits on top of the upper...More Details »
Choose from our super tough polyurethane formula or black anodized billet aluminum.
Description: We have these available in our special polyurethane formula or black anodized billet CNC machined aluminum. These are 3/8" thick. For your front suspension. Stackable. Fits on top of the upper...More Details »
Description: A single factory bolt, nut and washer for your front lower strut/shock mount. Order two to service both front shocks/struts.
WARNING: This product can expose you to a chemical or...More Details »
Item #: TOY LOWER STRUT BOLT SET #1, (One Bolt, Washer and Nut)
Description: This kit allows you to drop the front differential reducing the angles on your c.v. axles and boots which can help prolong the life of these components.
Toytec's 1" diff drop spacers are...More Details »
Description: 6 top plate studs with nylock nuts, factory metric thread size but longer to fit spacers. Accommodates up to 1.25" of top spacer. These are 2" long. Tap out your factory studs with a hammer, tap...More Details »
Description: Our premium diff drop kits help alleviate some of the angle on your front CV axles when lifting 4x4 vehicles. Instructions are included.
WARNING: This product can expose you...More Details »
Description: This kit includes two lower stem cushion washers, two lower stem cushions, two upper stem cushions and two upper stem cushion washers. These are the parts that go on your front shocks’ threaded...More Details »
Description: Package of 6 Extended Top Plate Studs, 2" length. Factory metric thread, uses your factory top plate nuts. Tap out your factory studs with a hammer and tap these in.
WARNING: This...More Details »
Description: The Toytec Bump Stop Relocation and Extension kit is designed to move your factory bump stop down and to the rear to properly re-align and correct for aftermarket lifts. It will also extend the...More Details »
Description: 2" Rear Lift "Superflex" coil springs. 10% increase in load capacity/spring rate.
These coils are custom made to ToyTec's specs for a stock like ride and great flex off road. With 8 coil...More Details »
Description: Relocates front swaybar to eliminate contact with coil/shock off road.
Can be used with any 3" suspension lift. Bolt on design.
Made from T-6 Aluminum Billet with Zinc plated Metric...More Details »
Description: A high performance front coil spring set from Wheeler's Off-Road and Eibach Spring.
Sold as a set of (2) front coil springs
Lift heights can vary slightly depending on engine type,...More Details »
Description: A high performance rear coil spring set from Wheeler's Off-Road and Eibach Spring. Provides approx 1.5" of lift and a comfortable 12% increase in spring rate on the 2003-2009 4Runner and 2007-2014...More Details »